Zum Hauptinhalt springen

Howto display user defined properties in the map - Wissensdatenbank / Produkte / Industrial HiVision - Belden Support Center

Howto display user defined properties in the map

This lesson describes howto display user defined properties in the IHV map.
As an example a customized map for temperature values should be created.

 Copy link to   to clipboard

User Defined Properties Copy link to User Defined Properties  to clipboard

Select Configuration -- User defined Properties

 Copy link to   to clipboard

New Entry Copy link to New Entry  to clipboard

Click New to create a new property

 Copy link to   to clipboard

MIB Viewer Copy link to MIB Viewer  to clipboard

Click the "..." button to browse through the MIB tree
or
Copy and paste the OID from the MIB Variable Finder document.

Note: Browsing the MIB and select a SNMP variable automatically fills the type field and if defined the mapping (e.g. 1=on, 2=off)

 Copy link to   to clipboard

Temperature Upper Limit Property Copy link to Temperature Upper Limit Property  to clipboard

Create a new property for the upper temperature limit.
OID: 1.3.6.1.4.1.248.14.2.5.2
Instance: 0
Type: Integer

 Copy link to   to clipboard

Temperature Lower Limit Property Copy link to Temperature Lower Limit Property  to clipboard

Create a new property for the lower temperature limit.
OID: 1.3.6.1.4.1.248.14.2.5.3
Instance: 0
Type: Integer

 Copy link to   to clipboard

Assign new Properties Copy link to Assign new Properties  to clipboard

1. Navigate to New Property in the MultiConfig
2. Click New
3. Select the previous configured properties and click OK
4. Write the changes to the selection of devices

 Copy link to   to clipboard

Overview Map Copy link to Overview Map  to clipboard


Create a temperature overview map and arrange the icons accordingly.
The picture shows an example with a background image.
All icons are copies of objects in other maps.

 Copy link to   to clipboard

Open Multiconfig Copy link to Open Multiconfig  to clipboard

In the new created overview map select the current temperature icons.
Right click to open the context menu and select MultiConfig.

 Copy link to   to clipboard

Change Properties Copy link to Change Properties  to clipboard

Change the polling interval to 10s