Open your web browser and type the ip address of the switch into the address field of the browser.
Confirm with ‘return’
When java has correctly started, a login screen shows up.

To be able to upload new firmware, you need to log in with admin rights.
The default values are:
Login: admin
Password: private

After succeful login the system overview screen is shown.

1. Select "Basic Settings" -"Software" in the menu tree on the left hand.
2. Click on the "..." button in the "HTTP Software Update" section.

1. Search and select the correct firmware file in the file selection window.
2. Click "Open" to close the file selection window.

1. The file path is automatically added to the File field.
2. Start the update process by clicking the "Update" button.

1. During the file transfer, the window is greyed out, and a "Please Wait" popup message is shown.
2. Wait until a "Update completed successfully" message appears.

Confirm with "OK"

1. Click "Reload" and compare the "Stored- and Running Version".
2. The update firmware version is shown in the "Stored Version"

To activate the new uploaded firmware a "Cold Start" needs to be performed.
Go to "Basic Settings" -"Restart" and click on "Cold Start".

Click "OK" to reboot the device immediately.

While the switch reboots the web browser session is interrupted.
Reload the web interface after the switch completely booted up.
Depending on the used hardware this can take up to 2 minutes.

Check again the "Stored- and Running Version" in the "Software" menu.
Both should show the latest firmware version.