This how describes the firmware update on EAGLE20 via SFTP
Prerequisites
-ssh access enabled on EAGLE
Tools needed:
-WinSCP -can be downloaded from http://winscp.net
WinSCP Login
Start WinSCP and connect to the EAGLE20 with the following session details:
1. select file protocol SFTP
2. enter the IP address or host name of the EAGLE20
3. login with admin and password. If you leave it blank you will be prompted if you press Login.
4. establish the session by pressing 'Login'
Drag & Drop the firmware file
Navigate to /upload/firmware in the right window (remote site)
Drag & drop the firmware file eagleSDV.bin in the right window
Upload Progress
A pop-up window shows the progress of the copy operation
Firmware Updating
Once the file is uploaded completely the EAGLE starts updating the firmware.
If you refresh the directory listing you can see the file 'updating' as long as the update process is in progress.
Update completed
The file 'ok' in the directory listing indicates that the update has completed successfully.
The process takes approx. 30s to complete.
If the update fails you will see the file 'error' instead. You can see the complete error message if you open the file in a text editor.
Reboot
Reboot the EAGLE20 to activate the new firmware